Samsung ML-1450-XAX - Manual (Page 195)

F.6 P
RINTER
O
PTIONS
7
Tighten the two screws as shown.
8
Tighten the two screws, then replace
the plate.
9
Reconnect the power cord and network
cable, then turn the printer on.
Note: For information on configuring and using the printer on a network environment, refer to
the documentation provided with the network card option.
Network Interface Card
6
Align the connector on the network card
with the connector on the control board.
Push the card firmly into the connector
until it is completely inserted in place.