Critical installation warnings – Samsung RS25H5121 User Manual

Page 2

Advertising
background image

• Do not install the refrigerator in a damp location or place where it may come in contact with water.

- Deteriorated insulation on electrical parts may cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or expose it to the heat from stoves, room heaters, or other

appliances.

• Do not plug several appliances into the same multiple power strip.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that
matches the voltage listed on the refrigerator’s rating plate.

- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire

hazard from overheated wires.

• If the wall socket is loose, do not insert the power plug.

- There is a risk of electric shock of fire.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not bend the power cord excessively or place heavy articles on it.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord

between objects, or push the power cord into the space behind the appliance.

- When moving the refrigerator, be careful not to roll over or damage the power cord

- This may result in an electric shock or fire.
• Never unplug your refrigerator by pulling on the power cord.

Always grip the plug firmly and pull straight out from the outlet.

- Damage to the cord may cause a short-circuit, fire, and or electric shock.
• Do not use aerosols near the refrigerator.

- Using aerosols near the refrigerator may cause an explosion or fire.
• Do not install this appliance near a heater or inflammable material.
• Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain

drops).

• Do not install this appliance in a location where gas may leak.

- This may result in an electric shock or fire.

• This refrigerator must be properly located and installed in accordance with the instructions in this manual before you

use it.

• Connect the power plug in the proper position with the cord hanging down.

- If you connect the power plug upside down, the wire can get cut off and cause a fire or electric shock.
• When moving the refrigerator, be careful not to roll over or damage the power cord.

- This constitutes a fire hazard.
• Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of children.

- There is a risk of death from suffocation if a child puts the packing materials on his or her head.
• The appliance must be positioned so that the plug is accessible after installation.

- Failing to do so may result in an electric shock or fire due to electric leakage.
• You need to remove all the protective plastic film before you initially plug the product in.

CRITICAL INSTALLATION WARNINGS

Advertising
This manual is related to the following products: