Connecting to a tv with dvi jack – Samsung DVD-R135-XAA User Manual

Page 25

Advertising
background image

C

onnecting &

Setting Up

English -

25

Connecting to a TV with DVI Jack

Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder to the DVI
IN terminal of your TV.
Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD Recorder to the
AUDIO (red and white) IN terminals of your TV. Turn on the DVD Recorder and TV.
Press the input selector on your TV remote control until the DVI signal from the DVD Recorder appears on your TV
screen.

HDMI OUT

To change HDMI output resolution, see page 42.

HDMI (High Definition Multimedia Interface)

HDMI is an interface to enable the digital transmission of
video and audio data with just a single connector. Since
HDMI is based on DVI, it is completely compatible with
DVI. The only difference between HDMI and DVI is that
HDMI supports multi-channel audio.
Using HDMI, the DVD recorder transmits a digital video
and audio signal and displays a vivid picture on a TV
having an HDMI input jack.

HDMI connection description

HDMI connector - Both uncompressed video data and
digital audio data (LPCM or Bit Stream data).
- Though the DVD recorder uses a HDMI cable, the DVD

recorder outputs only a pure digital signal to the TV.

- If TV does not support HDCP (Highbandwidth Digital

Content Protection), snow noise appears on the screen.

Why does Samsung use HDMI?

Analog TVs require an analog video/audio signal.
However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter
(in the DVD Recorder) or an analog-to-digital converter (in
the TV) is required. During this conversion, the picture
quality is degraded due to noise and signal loss. HDMI
technology is superior because it requires no D/A
conversion and is a pure digital signal from the DVD
recorder to your TV.

What is the HDCP?

HDCP (High-bandwidth Digital Content Protection) is a
system for protecting DVD content outputted via HDMI
from being copied. It provides a secure digital link between
a video source (PC, DVD. etc) and a display device (TV,
projector. etc). Content is encrypted at the source device
to prevent unauthorized copies from being made.

NOTE

R135-XAA-ENG-14-29 2006.3.11 9:54 AM Page 25

Advertising
This manual is related to the following products: