Samsung RF26HFPNBSR-AA - Manual (Page 7)

2. Setting up your French Door Refrigerator
Selecting the best location for the Refrigerator
• A location with easy access to a water supply.
• A location without direct exposure to sunlight.
• A location with a leveled floor.
• A location with enough space for the refrigerator doors
to open easily.
• A location that allows sufficient space to the right, left,
back and top for air circulation.
• A location that allows you to move the refrigerator easily
if it needs maintenance or service.
• Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
• Do not install the refrigerator where the temperature will go below 50ºF (10ºC).
• Do not locate the refrigerator where it may become wet.
• When moving your refrigerator
To prevent floor damage, be sure the front adjusting legs are in the up position (above the floor).
FLOORING
For proper installation, you must place this refrigerator on a level, hard
surface that is the same height as the rest of the floor.
This surface should be strong enough to support a fully loaded refrigerator.
To protect the finish of the flooring, cut a large section of the cardboard
carton and place it under the refrigerator where you are working.
When moving the refrigerator, you need to pull and push it straight
forwards or back.
Do not wiggle it from side to side.
3 inches 3/4
2 inches
2 inches
2 inches
3 ¾ inches
B
A
C
E
D
B
A
C
E
D
Model RF261B**/RF260B**/ RF26H**
Depth “A” 33 27/32” (860mm)
Width “B” 35 25/32” (909mm)
Height “C” 68 3/8” (1737mm)
Overall Height “D” 70” (1778mm)
Depth "E" 36 7/32” (920mm)
2 inches