Samsung XE300TZC-K01US - Manual (Page 81)

80
Chapter 3.
Using the computer
Setting a Boot Password
If you set a password, you have to enter the password when you
turn the computer on or enter the BIOS Setup.
By configuring a password, you can restrict system access to
authorized users only and protect data and files saved on the
computer.
The password setting provides the following 2 sub menus. •
(Supervisor Password and User Password)
Do not lose or forget your password.
•
Do not let others know your password. •
If you forget the Supervisor Password or HDD Password, •
you will need to request assistance from the service center.
In this case, a service fee will be charged.
When you forget the User Password, you can disable
•
the Supervisor Password, and the User Password is also
automatically disabled.
The screen images and terms may differ from actual
•
product depending on the computer model and driver
version.
Setting a Supervisor Password
If you set a Supervisor Password, you need to enter the password
when you turn the computer on or enter the BIOS Setup.
Setting only the Supervisor Password and User Password is not
very secure.
1
Select the Security menu in the BIOS Setup.
2
In the Set Supervisor Password item, press <Enter>.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Supervisor Password Clear
User Password Clear
Set Supervisor Password >
Set User Password >
Password On Boot On
TPM 2.0 Device On
Secure Boot Configuration >