Samsung HT-D550-ZA - Manual (Page 29)

English
29
03
Setup
NOTE
ASC setup can be made when there is no disc
in the product.
You cannot adjust the volume during the ASC
setup.
If the auto sound microphone is disconnected
during the ASC setup, the setup will be
canceled.
When ASC function is activated, the DSP/EQ,
Dolby Pro Logic ll and P. BASS sound effects
will not work.
If the product is connected to external devices
or other components (such as an iPod, AUX,
D.IN), the ASC Setup may not work exactly.
Noise may result in wrong measurement.
So please proceed with the measurement in a
quiet room to obtain proper calibration.
Place the microphone on the main listening
position.
Nothing should get in the way between
speakers and microphone.
Note that the test tone of the speaker may be
loud when conducting the test.
Do not place the microphone behind the
furniture or too close to the wall. Otherwise,
it can produce an incorrect test result.
Auto Sound Calibration
You will hear either the ASC mode or the User
Speaker Settings.
On : You will hear sound in the Auto Sound
Calibration(ASC) mode.
Off : You will hear sound in the Speaker Setting
value you set.
Settings
Move Select Return
Change Select Return
Auto Sound Calibration : On ►
Auto Sound Calibration Setting
Auto Sound Calibration
✎










•
•
Auto Sound Calibration Setting
Plug the ASC microphone into the ASC input
jack.
Place the ASC microphone at the listening
position.
Auto Sound Calibration will be automatically set
up in the following sequence:
Front Left Center Front Right Surround
Right Surround Left Subwoofer
Press the RETURN button to cancel the Auto
Sound Calibration Setting.
When the message "REMOVE MIC" appears on
the display, unplug the ASC microphone.
NOTE
Setting the Auto Sound Calibration function
takes about 3 minutes.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
You can select either Full, 6/8, 4/8, 2/8, off.
AUDIO SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
1.
2.
•
•
•
✎

•
•
HT-D550-ZA-ENG-1228.indd 29 HT-D550-ZA-ENG-1228.indd 29 2011-12-29 1:07:52 2011-12-29 1:07:52