Connecting an s-vhs vcr (depends on the model) – Samsung TXR1635X-XAC User Manual

Page 14

Advertising
background image

14

I

N S TA L L AT I O N

3

Connect an S-video cable
between the S-VIDEO OUT
jack on the VCR and the
S-VIDEO IN jack on the
TV.

An S-video cable is usually included with an S-VHS VCR. (If not, check your local
electronics store.)

Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV
may be different.

2

Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
INPUT2 jacks on the TV.

1

To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.

Connecting an S-VHS VCR (Depends on the model)

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.

(This connection delivers a better picture as compared to a standard VHS VCR.)

VCR Rear Panel

TV Rear Panel

Coaxial Cable

VCR Rear Panel

TV Rear Panel

Audio Cable

VCR Rear Panel

TV Rear Panel

S-Video Cable

Advertising
This manual is related to the following products: