Samsung SPH-M260ZKABST - Manual (Page 28)

2A. Phone Basics 21
Phone Bas
ics
Saving a Phone Number
You can store up to 4200 phone numbers and 600
Contacts entries in your phone. Each entry’s name can
contain 64 characters. Your phone automatically sorts
the Contacts entries alphabetically. (For more
information, see “2D. Contacts” on page 42.)
To save a number from standby mode:
1. Enter a phone number and press OPTIONS (right
softkey) > Save .
2. Highlight New Entry or Existing Entry and press
.
3. Highlight a label and press .
4. Use the keypad to enter the new contact name
and press
to save the new entry.
– or –
Search for an existing contact name and press
to save the new number.
5. Press DONE (left softkey).
Finding a Phone Number
You can search Contacts for entries by name.
1. Press CONTACTS (right softkey) and enter the first
letter or letters of an entry. (The more letters you
enter, the more specific the search.)
2. To display an entry, highlight it and press . To
dial a number, highlight it and press .
Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory. Dial speed dial entries using one
keypress for locations 2–9 or two key presses for
locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ Press and hold the appropriate key for
approximately two seconds. The display confirms
that you have dialed the number when it shows
“connecting...”.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.