Samsung SWC-R640LBAXAR - Manual (Page 71)

Understanding Your Contacts 66
Note: The Contacts command does not dial phone numbers for a Contact.
To look up information for a specific Contact:
1. In Standby mode, tap Menu ➔ Voice Commands. “Say a
Command” displays on the screen and plays through the
speaker.
2. Say “Contacts”.
Voice Service prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want to
call, exactly as it is entered in your Contacts list.
• If Voice Service recognizes the name you said, the contact information
displays on the screen.
• If Voice Service does not recognize the name you said, a choice list of up
to three names displays on the screen, and Voice Service prompts you
with “Try again?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name,
or use the keypad to select the correct name from the list. (For
more information, refer to “Confirm Choices” on page 130.)
• To say the name again, tap Repeat.
5. The contact information for the name you selected displays on
the screen.
• Tap for the following options:
– Set Speed Dial: Assign a Speed Dial number to this Contact.