Samsung WA48H7400AW-A2 - Manual (Page 9)

ALIGNMENT AND ADJUSTMENTS
9
Fast Time Down Test Mode
Definition of Fast Time Down Test Mode:
- Fast Time Down Test Mode is to forward the program to the next cycle stage.
How to Enter:
- To enter the Fast Time Down Test Mode, press the Temp. key during Service Mode.
Fast Time Down Test Mode:
1. Activate the Service Mode in advance.
2. To forward the program to the next cycle stage, press the Temp. key.
Board Input Test Mode
Definition of Board Input Test Mode:
- Board Input Test Mode is to displays a specified input after a key press.
How to Enter:
- To enter the Board Input Test Mode, press the Self Clean key during Service Mode.
Board Input Test Mode:
1. Activate the Service Mode first.
2. Press the key to start Board Input Test.
3. Turn the Jog-Dial so that the Normal course is turned on, and The Water Temperature will be
displayed in Celsius.
4. Turn the Jog-Dial so that the Perm Press course is turned on, The Water Temperature will be
displayed in Fahrenheit.
5. Turn the Jog-Dial so that the Active Wear(WA48H7400A*, WA45H7200A*)/Quick Wash
(WA45H7000A*) cycle is turned on, The door status will be displayed (OP if open, CL if closed).
6. Turn the Jog-Dial so that the Quick Wash (WA48H7400A*, WA45H7200A*) / Spin (WA45H7000A*)
cycle is turned on, The Door Lock Switch status will be displayed (UL if unlocked, LO if locked).
7. Turn the Jog-Dial so that the Spin (WA48H7400A*, WA45H7200A*) / Rinse+Spin (WA45H7000A*)
cycle is turned on, The Water Frequency will be displayed.
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
WARNING
Self Clean
WA7000HA WASH_WA48H_TECH MANUAL_DC68-03132G-01_EN.indd 9 2014-1-6 15:56:28