Samsung SCH-R455ZKATFN - Manual (Page 46)

42
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note: The Contacts command shows the requested contact information in the display but does not
dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want to call, exactly as
it is entered in your contact list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list.
5. The contact information for the name you selected appears in the display.