Samsung EC-NV11ZBBA-US - Manual (Page 66)

ŝ65Ş
Setup menu
- When using a TV as an external monitor, you will need to select the external
or AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.
- When the camera is connected to an external monitor, some parts of the
image may not display.
- When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
- When the camera is connected to an external monitor, the button sound may
not sound.
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.
No
Yes
Format
Delete All
Copy to Card
Video Out
Reset Ȝ
[ Initialisation ]
ƈ All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
ƃ Sub menus
[No] : Settings will not be restored to their defaults.
[Yes] : A confirmation window will display. Select
the [Yes] menu by pressing the smart button.
All settings will be restored to their defaults.
Exit:BACK
[ Selecting Video out type ]
ƈ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
ƈ Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the
stored still images or movie clips by connecting the
camera to an external monitor via the AV cable.
When the camera is connected to an external
monitor, the LCD monitor will be turned off
automatically.
NTSC
PAL
Format
Delete All
Copy to Card
Video Out
Reset
Ȝ
Exit:BACK
Yellow - Video
White - sound