Samsung SGH-T959ZKBTMK - Manual (Page 161)

Changing Your Settings 157
• Prefix dialling: when activated, this feature automatically prepends
a string of numbers (such as an area code) to any dialed number.
This feature is useful for international dialing, or dialing within an
area code where all the calls you make for a period of time use one
prefix. For more information, refer to “Prefix Dialing” on
page 46.
• Reject call with message: allows you to send a message
immediately after rejecting a call.
• Call status tones: sets a tone to play for the following status tones:
Call connect tone, Minute minder, or Call end tone. Touch each type
of status tone you want to play.
• Outgoing call vibration: sets a phone to vibrate when the
recipients answers the call.
• Alerts on call: activates an alert tone for new messages being
received during an active call.
Configuring Voice Calls
To configure voice calls:
1. From the Home screen, touch ➔ Settings ➔ Call
settings ➔ Voice call.
2. Touch Call forwarding and select one of the following
options:
• Always forward: incoming calls are re-routed to a secondary
number that you specify.
• Forward when busy: forwards all your calls to voicemail when your
phone is busy.
• Forward when unanswered: automatically forwards to your
voicemail number when the phone is not answered, and otherwise
allows you to enter a voicemail number.
• Forward when unreachable: automatically forwards to your
voicemail number when the phone is not in service, or is turned off.
3. Touch Call barring blocks the ability to make calls.
4. Touch Call waiting to enable the Call waiting feature.
5. Touch Auto redial the phone automatically redials up to ten
times when the person does not answer the call or is
already on the phone, provided your call is not sent to
voice mail.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls to a
limited set of phone numbers.
Enabling FDN
1. From the Home screen, touch ➔ Settings ➔ Call
settings ➔ Fixed Dialing Numbers.
2. Touch Enable FDN.
3. At the prompt, enter your PIN2 code and tap OK.