Samsung SGH-T959ZKBTMK - Manual (Page 146)

142
Connecting as a Mass Storage Device
You can connect your device to a PC as a removable disk and
access the file directory. If you insert a memory card in the
device, you can also access the files directory from the memory
card by using the device as a memory card reader.
Note: The file directory of the memory card displays as a removable disk,
separate from the internal memory.
1. Insert a memory card into the device to transfer files from
or to the memory card.
Note: To use any downloaded market application that requires a USB
connection between your phone and your PC, you should first set the
USB setting to Mass storage.
2. From the Home screen, tap ➔ Settings ➔
Applications ➔ USB settings ➔ Mass storage.
3. Press to return to Idle mode.
4. Connect the multifunction jack on your device to a PC
using an optional PC data cable.
A pop-up window displays on the PC when connected.
5. Open the folder to view files.
6. Copy files from the PC to the memory card.
Wi-Fi
About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for certain
types of Wireless Local Area Networks (WLAN). Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be Open
(unsecured) as within most Hot Spots, or Secured (requiring
knowledge of the Router name and password).
Activating Wi-Fi
By default, your device’s Wi-Fi feature is turned off (deactivated).
Activating Wi-Fi allows your device to discover and connect to
compatible in-range WAPs (Wireless Access Points).
1. Tap ➔ Settings ➔ Wireless and network ➔ Wi-Fi
settings.
2. Tap the Wi-Fi field to activate the feature. A checkmark
indicates that Wi-Fi is active. The device scans for
available in-range wireless networks and displays them
under Wi-Fi networks on the same screen.