Samsung DVD-R2000 - Manual (Page 45)

45
Advanced Functions
To change the timer recording program you set
1 Press the TIMER button on the remote.
- Display the Timer REC Scheduling.
2 Use the UP/DOWN button to select the Program No. that you
want to change. Press the ENTER button.
3 Move to a desired field using the LEFT/RIGHT button.
4 Change contents using the UP/DOWN button.
Press the ENTER button.
If you change the source;
- Press the RETURN/INPUT button to select the Line Input( L1~L3) when setting
the Src.
- To change the channel when the Line Input has been set, press the
RETURN/INPUT button until the Channel No. appears, and press UP/DOWN but-
ton.
5 To make the timer REC scheduling menu disappear, press the
TIMER button again or press the RETURN/INPUT button.
Notes
• The timer recording is available only when the DVD-R2000 is in Power OFF mode.
• When you press the POWER button during the timer recording, the timer recording will
stop.
• When the remaining disc memory is smaller than the amount of the time set, the recording
will only be done within the remaining disc memory.
3 5 05 / 31 12 : 41 AM 02 : 42 Pm N o r m a l S P