Samsung SCX-5835FN-XAR - Manual (Page 73)

Scanning_ 11
MACINTOSH SCANNING
You can scan documents using Image Capture program. Macintosh OS
offers Image Capture program.
Scanning with USB
1. Make sure that the machine is connected to your computer and powered
on.
2. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
(See "Loading originals" on page 1.)
3. Start Applications and click Image Capture.
If No Image Capture device connected message appears,
disconnect the USB cable and reconnect it. If the problem
continues,refer to the Image Capture’s help.
4. Set the scan options on this program.
5. Scan and save your scanned image.
• For more information about using Image Capture, refer to the Image
Capture ’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
• If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Scanning with network
1. Make sure that the machine is connected to your computer and powered
on.
2. Load originals face up into the document feeder , or place a single
original face down on the scanner glass.
(See "Loading originals" on page 1.)
3. Start Applications and click Image Capture.
4. For Mac OS X 10.4 ~ 10.5
Click Devices and click Browse Devices.
For Mac OS X 10.6
Select your device below SHARED. Skip to step 7.
5. For Mac OS X 10.4:
Select your machine in Twain devices option. Make sure that Use
TWAIN software
checkbox is checked, and click Connect.
• If a warning message appears, click Change Port.. to select port.
• If TWAIN UI appears, from the Preference tab, click Change Port.. to
select port.
Refer to Scan Manager for Change port.. use. (See "Setting
scan information in Scan Manager" on page 11.)
For Mac OS X 10.5:
Make sure that Connected checkbox is checked beside your machine in
Bonjour Devices
.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
6. Set the scan options on this program.
7. Scan and save your scanned image.
• For more information about using Image Capture,refer to the Image
Capture ’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant softwares, such as Adobe
Photoshop.
• If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Setting scan information in Scan Manager
To find out about Scan Manager program information, to check the
installed scan driver's condition, to change scan settings. and to add or
delete the folders where scanned documents to computer are saved in
Scan Manager program, follow these instructions:
1.
From the Smart Panel menu on Status bar, click Scan Manager.
2. Select the appropriate machine from the Scan Manager .
3. Press Properties.
4. Use Set Scan Button to change the file destination or scan settings,
to add or delete application programs, and to format files. You can
change the scanning machine by using Change port. (Local or
Network)
5. When done, press OK.
LINUX SCANNING
You can scan a document using the Unified Driver Configurator window.
Scanning
1. Double-click the Unified Driver Configurator on your desktop.
2. Click the button to switch to Scanners Configuration.
3. Select the scanner on the list.
If you use only one machine device and it is connected to the computer
and turned on, your scanner appears on the list and is automatically
selected.
If you have two or more scanners connected to your computer, you can
select any scanner to work at any time. For example, while acquisition is
in progress on the first scanner, you may select the second scanner, set
the device options and start the image acquisition simultaneously.
4. Click Properties.
5. Load originals face up into the document feeder, or place a single
original face down on the scanner glass.
(See "Loading originals" on page 1.)
6. From the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the