Functions ( ) – Samsung EC-TL90ZZBPRUS User Manual
Page 39
38
Metering
If you cannot obtain suitable exposure conditions, you can change
the metering method to take brighter pictures.
[Multi] (
) : Exposure will be calculated
based on an average of
the available light in the
image area. However, the
calculation will be biased
towards the centre of the
image area. This is suitable
for general use.
[Spot] (
) : Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable
when the subject in the centre is exposed correctly,
regardless of the back lighting.
[Center We ighted] (
)
: Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the centre of the
image area. This is suitable for taking a picture of
small object like a fl ower or insects.
Ä If the subject is not the centre of the focus area, do not use the
spot metering as this may result in an exposure error. In this
circumstance, it is better to use exposure compensation.
Metering
Back Move
Drive mode
You can select single, continuous, motion capture, and AEB (Auto
Exposure Bracketing).
[Single] (
) :
Take one picture only.
[Continuous] (
) : Images will be taken
continuously until the
shutter button is
released.
[Motion Capture] (
) : This takes 5 shots
per second, when
the shutter is pressed and held down. After
completing the continuous shooting, images
are saved and the images play back on the
Rear LCD. The maximum number of shots is
30 and the image size is fi xed as VGA.
[AEB] (
)
: Take three pictures in a series in different
exposures: standard exposure (0.0EV),
short exposure (-1/2EV) and over exposure
(+1/2EV).
å High resolution and picture quality increases fi le saving time,
which increases stand-by time.
å If the [Continuous], [Motion Capture], [AEB] sub menu is selected,
the fl ash will be off automatically.
å If less than 3 pictures are available in the memory, the AEB
shooting is not available.
å It is best to use a tripod for the AEB shooting as the time to save
each image fi le is longer and blurring caused by camera shake
may occur.
Drive
Back Move
Functions (
)