Turn your phone on, Turn your phone off, Remove the battery – Samsung SCH-R610ZKAUSC User Manual

Page 9

Advertising
background image

Getting Started

6

Activating Your Phone

Turn Your Phone On

1.

Open your phone by pushing the slide up.

2.

Press and hold the

key.

3.

The phone begins searching for a network

signal.

4.

Once the phone finds a signal, the time, date

and day appear in the bottom of the display.

5.

You’re now ready to open the slide on your

phone and to place and receive calls.

Tip: Your phone has an internal antenna. Do not touch the phone

case over the antenna while using your phone as this can affect
call quality and can cause the phone to operate at a higher
power level than is necessary.

Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon (

) appears at

the top of the phone’s display. If you cannot place or receive calls, try later when service is available,
or at another location.

Turn Your Phone Off

1.

Push the slide up to open your phone.

2.

Press and hold the

key for two or more seconds. Your phone powers

off.

Note: If your phone is on and you press

for less than one second, the phone will not power off. This

prevents your phone from being turned off accidentally.

Remove the Battery

Important!: You must unplug the Travel Adapter (if it is connected) before removing the battery from the

phone during charging to avoid damage.

1.

If your phone is on, do the following:

Push the slide up to open your phone.
Press and hold the

key to turn off the phone.

Close the phone.

Press

Press

Antenna

Advertising