O o x – Samsung DMT800RHB-XAA User Manual

Page 9

Advertising
background image

setting up your dishwasher

_9

CHILD LOCK/
UNLOCK

This option allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To lock and unlock the buttons on the control panel, hold the Sanitize
button down for three(3) seconds.
- When Power is On : Hold down the Sanitize button for three (3)

seconds.

- When Power is Off : Push the Power button fi rst, and then hold down

the Sanitize button for three (3) seconds.

HALF LOAD

Select this option to wash a small load of dishes. We recommend that you
place dishes in the lower rack when you use this feature.

When you select Half Load, the dishwasher will not wash dishes
placed in the upper rack.

If you select the Half Load option, both water and electricity consumption
are reduced.

STORM WASH

Use this option when you want to wash pots and pans, durable serving
bowls, and other large, very dirty, hard to clean dishes.
To use Storm Wash, place the dishes face down in the marked Storm Wash
area in the lower basket.

You cannot select the Delicate cycle if you select the Storm Wash
option.

CYCLE
SELECTOR

Select the appropriate wash cycle depending on the soil level of your
dishes. After you select a cycle, the Cycle On light for that cycle lights up.
If you want to cancel the selected cycle, press the selected cycle button
again.

CANCEL &
DRAIN

To cancel a cycle currently running and drain the dishwasher, hold down
both the Heavy and Delicate buttons for three (3) seconds.

POWER

When you press the Power button, the entire display turns on and off, and
then the light of the most recently fi nished cycle lights up.
When the cycle you selected has fi nished, all other indicator lights are
turned off and the “Clean” light is illuminated for 10 minutes.
Then, the Power turns off automatically.

You can select options (Delay start, Sanitize, Half load, or Storm wash) before starting a cycle. If you
change the cycle after selecting an option, the original cycle is reset.

Make sure to the proper way of use. If not, it can lose the response sensitivity.
-

Touch the center of each keypad using fi nger.

-

Make sure to clean the touch control’s surface.

-

Be careful to touch the key pads together except Cancel & Drain option.

01 setting up your dishwasher

5

6

4

7

8

9

O O X

DMT800_DD68-00050A-05_EN_20120921.indd Sec3:9

DMT800_DD68-00050A-05_EN_20120921.indd Sec3:9

2012-09-21

2:08:41

2012-09-21

2:08:41

Advertising
This manual is related to the following products: