Samsung EC-L60ZZBBB-E1 - Manual (Page 62)

ŝ61Ş
Specifications
ƈ Image Sensor
- Type : 1/2.5" CCD - Effective Pixel : Approx. 6.0 Mega-pixel - Total Pixel : Approx. 6.2 Mega-pixel
ƈ Lens
- Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm equivalent : 35 ~ 105mm)
- F No. : F2.8 ~ F4.9
- Digital Zoom :ϛStill Image mode : 1.0X ~ 5.0X
ϛPlay mode : 1.0X ~ 11.0X (depends on image size)
ƈ LCD Monitor : 2.4" color TFT LCD (112,320 pixel)
ƈ Focusing
- Type : TTL contrast auto focus
- Range
ƈ Shutter
- Type : Mechanical and Electronic shutter
- Speed : 2 ~ 1/2,000 sec. (Night Mode : 15 ~ 1/2,000 sec.)
ƈ Exposure
- Control : Program AE Metering : Multi, Spot
- Compensation : ±2EV (0.5 EV steps)
- ISO Equivalent : Auto, 50, 100, 200, 400
ƈ Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
- Range : Wide : 0.2 ~ 3.0m, Tele : 0.4 ~ 2.0m (ISO AUTO)
- Recharging Time : 4.0sec (Full), 5.0sec (Low battery)
ƈ Sharpness : Soft, Normal, Vivid
ƈ Effect : Color, B&W, Sepia, Red, Green, Blue, Negative, RGB, Highlight,
Composite, Frame
ƈ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom
ƈ Voice Recording : Voice Recording (Memory & Battery capacity dependant)
Voice Memo in Still Image (Max. 10 sec.)
Normal Macro Auto Macro
Wide 5~80cm 5cm~infinity
Tele 40~80cm 40cm~infinity
80cm ~ infinity
Before contacting a service centre
The images don't play back
ҮIncorrect file name (Violation of DCF format)
ƍ Do not change the image file name
Colour of image is different to the original scene
ҮWhite balance or effect setting is incorrect
ƍ Select appropriate White balance and effect
Images are too bright
ҮExposure is excessive
ƍ Reset exposure compensation
No image on external monitor
ҮThe external monitor has not been connected properly with the camera
ƍ Check the connection cables
ҮThere are incorrect files in the memory card
ƍ Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
ҮCable connection is incorrect
ƍ Check the connection
ҮThe camera is off
ƍ Turn the camera on
ҮThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~
10.3. Alternatively the PC does not support USB.
ƍ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.3 to PC that
supports USB.
ҮThe camera driver is not installed
ƍ Install a [USB Storage Driver]