Samsung SEPM500BKASPR - Manual (Page 50)

26 Section 2A: Your Phone: The Basics
Installing the Battery
To install the Li-Ion battery:
1. Insert the battery into the opening on the back of the
phone at a 45-degree angle, making sure to line up the
gold contacts. Gently press down until it snaps into
place.
2. Install the protective cover by lining up the tabs and
gently sliding the cover up until it snaps into place.
Removing the Battery
To remove your battery:
1. Remove the protective cover by pressing the release
notch and sliding the cover down.
2. Grip the battery at the top and pull up and out at a
45-degree angle.