Samsung HLS5086WX-XAA - Manual (Page 27)

English - 27
4 Press the ENTER button to start the auto
program. By default, the cable TV system
is set to “STD”.
If you want to select another type of
cable system, press the œ button and
use the … or † button to select
“STD”, “HRC” or “IRC”.
Press the ENTER button.
5 The TV will begin memorizing all of the
available channels.
After all the available channels are
stored, the Auto program menu
reappears. Press the ENTER button at
any time to interrupt the memorization
process.
Press the ENTER button, then the menu
to set the clock mode is automatically
displayed.
6 Press the ENTER button to select “Clock
Mode”.
Press the … or † button to select “Auto”
or “Manual”, then press the ENTER
button.
Continued...
Plug & Play
Enter Skip
Selects a cable signal type for your
location.
Move
Start
HRC
IRC
Auto Program
Skip
Auto Program is incomplete.
14 channels are memorized.
Air : 9 Cable : 5
Plug & Play
Sets the current time manually or automatically.
Clock Mode
• STD, HRC, and IRC identify various
types of cable TV systems. Contact
your local cable company to identify
the type of cable system that exists in
your particular area. At this point the
signal source has been selected.
Enter Skip Move
Auto Program
Enter Skip
Auto program in progress.
Cable 26
37%
Stop
Auto
Manual
STD
BP68-00586A-00Eng(026~047) 2/13/06 2:18 PM Page 27