Samsung HLS5086WX-XAA - Manual (Page 20)

Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
1 Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
2 Connect a set of audio
cables between the AUDIO
IN jacks on the TV and the
AUDIO output jacks on the
camcorder. If you have a
mono Camcorder, connect
L(mono) to the Camcorder
audio out using only one
audio cable.
3 Connect a video cable
between the VIDEO IN (or
S-VIDEO IN) jack on the TV
and the VIDEO (or S-VIDEO)
output jack on the Camcorder.
The audio-video cables shown
here are usually included with
a Camcorder. (If not, check
your local electronics store.)
If your Camcorder is stereo,
you need to connect a set of
two cables.
NOTE
• Please be sure to match the
color coded input terminals
and cable jacks.
Connections
English - 20
Camcorder
Output Jacks
1
TV Rear of right side
or
Camcorder
2
3
BP68-00586A-00Eng(016~025) 2/13/06 2:17 PM Page 20