Samsung HLS5086WX-XAA - Manual (Page 45)

English - 45
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Setting the Signal Source
1 Press the MENU button.
Press the ENTER button to
select “Input”.
2 Press the ENTER button to
select “Source List”.
Press the … or † button to
select a signal source, then
press the ENTER button.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTES
• Only connected devices can be selected.
• Before selecting an input source, connect an external device first.
• HDMI input can be selected only when the external device is
turned on and connected to the TV.
AV1
• When you connect
equipment to the TV,
you can choose
between the following sets of jacks: “AV1”, “AV2”,
“S-VIDEO1”, “S-VIDEO2”, “COMPONENT1”,
“COMPONENT2”, “PC”, “HDMI1”, or “HDMI2” on the TV’s
rear panel and “AV3” on the TV’s side panel.
Input
Source List : TV √
Edit Name √
WISELINK √
Move Enter Return
Source List
TV
AV1 : ----
AV2 : ----
AV3 : ----
S-Video1 : ----
S-Video2 : ----
Component1 : ----
Move Enter Return
† More
BP68-00586A-00Eng(026~047) 2/13/06 2:18 PM Page 45