Samsung SGH-I257ZKAATT - Manual (Page 101)

3. Touch S Beam and make sure the feature is turned on.
Touch OFF/ON to turn activate S Beam.
4. On the source device, which contains the desired photo
or video, touch Apps ➔ Gallery.
5. Locate and touch the selected photo or video to open it
in the preview window.
Important! Neither device must be in Lock mode or
displaying the Lock screen. Both devices must be
active and unlocked. It is recommended that the
target device be on the Home screen.
6. Place the two active NFC-enabled devices back to back
to begin.
Note: If the Touch to beam screen does not display on
the source device:
• Pull them apart.
• Verify the image is visible in the preview window on the
source device (providing the file).
• Place them together again.
7. From the Touch to beam screen, touch the reduced
image preview to begin the transfer.
8. When prompted, separate the two devices.
After a few seconds (depending on file size), the
transferred file will display on the recipient’s screen.
Sharing Multiple Photos with S Beam
To share multiple photos with S Beam:
1. On the source device (containing the desired image or
video), touch Apps ➔ Gallery.
2. Locate the selected folder.
3. Touch and hold the first image and place a check mark
on it and all desired images.
4. Place the two active NFC-enabled devices back to back
to begin.
5. From the Touch to beam screen, touch the reduced
image preview to begin the transfer.
6. When prompted, separate the two devices.
7. The photos are transferred to the other device.
Photos and Videos 94