Using my karaoke, Basic functions – Samsung MX-FS8000-ZA User Manual

Page 12

Advertising
background image

12

English

English

13

Basic Functions

• If the Bluetooth device has failed to pair with the

product, delete the previous “[Samsung] HI-FI XXXXXX”
found by the Bluetooth device and have it search for
the product again.

5. Play music on the connected device.

• You can listen to the music playing on the connected

Bluetooth device over the Hi-Fi Component system.

• In

Bluetooth

mode, some model's Play/Repeat/Stop/

Next/Back functions are not available.

The product only supports Middle Quality SBC data (up

to 237kbps@48kHz), and does not support High Quality

SBC data ([email protected]).

• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports the

A2DP (AV) function.

• You cannot connect to a Bluetooth device that

supports only the HF (Hands Free) function.

• Only one Bluetooth device can be paired at a time.
• Once you have turned off the Hi-Fi Component and

pairing is terminated, pairing will not be restored
automatically. To reconnect, you must pair the device
again.

• The Hi-Fi Component system may not search or

connect properly in the following cases:

- If there is a strong electrical field around Hi-Fi

Component.

- If several Bluetooth devices are simultaneously paired

with Hi-Fi Component.

- If the Bluetooth device is turned off, not in place, or

malfunctions.

• Note that such devices as microwave ovens, wireless

LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
which can cause electric interference.

To disconnect the Bluetooth device from
the Hi-Fi Component

You can disconnect the Bluetooth device from the

Hi-Fi Component. For instructions, see the

Bluetooth device's user manual.

• The Hi-Fi Component will be disconnected.
• When the Hi-Fi Component is disconnected from the

Bluetooth device, the Hi-Fi Component will display
DISCONNECTED ➞ READY on the its display.

To disconnect the Hi-Fi Component
from the Bluetooth device

Press the CD/Bluetooth button on the front panel

of the Hi-Fi Component to switch from Bluetooth

mode to another mode or turn off the Hi-Fi Compo-

nent.

• The connected Bluetooth device will wait a certain amount

of time for a response from the Hi-Fi Component before
terminating the connection. (Disconnection time may differ,
depending on the Bluetooth device)

• The currently connected device will be disconnected.

In Bluetooth connection mode, the Bluetooth connection

will be lost if the distance between the Hi-Fi Component
and the Bluetooth device exceeds 16.25 feet (5 meters).

• If the Bluetooth device comes back into the effective

range after disconnecting, you can restart the Hi-Fi
Component to restore the pairing with the Bluetooth
device.

• The Hi-Fi Component automatically turns off after 25

minutes in the Ready mode.

Using My Karaoke

You can use the MY Karaoke function to sing

along with your favorite CDs and USB tracks.

1. Connect the microphone to the MIC jack on the front

of the product.

`

If your microphone plug is larger than the 3.5 mm
MIC jack, you need a Connector-Adaptor (not
supplied) to complete the connection.

-

First, connect the Connector-Adaptor to the MIC jack

on the front of the product,

-

Second, connect the microphone (with larger jack) to
the Connector-Adaptor.

2. Press the MIC VOL-, + button on the remote

control to adjust the volume of the microphone.

3. Press the MY KARAOKE button on the remote

control to suppress the vocal if you need. Each time
the button is pressed, the selection is changed as
follows:
MY KARAOKE ON ➞ MY KARAOKE OFF

`

If you hear strange noises (squealing or howling)
while using the Karaoke feature, move the
microphone away from the speakers. Turning down
the microphone's volume or the speaker volume is
also effective. Do not aim the MICROPHONE
towards the SPEAKERS.

`

The microphone does not operate in the AUX and
TUNER mode.

`

If you connect a microphone, GIGA SOUND
automatically turns off. To turn Giga Sound back on,
you must remove the microphone, and then press
the Giga Sound button.

MX-FS8000-ZA-ENG_131118.indd 12

2013-11-18 �� 2:46:05

Advertising