Samsung DVD-VR357-XAA - Manual (Page 53)

R
ecording
English - 53
Unrecordable Video
Pictures with copy protection cannot be recorded on this DVD
Recorder & VCR.
When the DVD Recorder & VCR receives a copy guard signal while
recording, recording stops and the following message (to the left)
appears on the screen.
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one of the
following three signal types, Copy-Free, Copy-Once and Copy-Never.
If you want to record a copy-once type program, use a DVD-RW with
CPRM in VR Mode or DVD-RAM discs.
('O' : Supported, '-' : Not Supported)
Copy-Free Copy-Once Copy-Never
DVD-RW (Ver.1.1) O - -
DVD-RW (Ver.1.1)
with CPRM
VR mode
O O* -
DVD-R O - -
DVD-RAM (Ver.2.0) O O* -
DVD+R O - -
DVD+RW O - -
Once “Copy Once” has been recorded, additional recordings cannot be
performed.
* compatible with CPRM.
Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the media on which it is
recorded. It is supported by some DVD Recorder & VCR, but not by many
DVD players. Each blank recordable DVD has a unique 64-bit media
ID etched in the BCA(Burst Cutting Area). When protected content is
recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria)
cipher derived from the media ID. During playback, the ID is read from
the BCA and used to generate a key to decrypt the contents of the disc. If
the contents of the disc are copied to other media, the ID will be absent or
wrong and the data will not be decryptable.
Recording from External Equipment you
are Watching
Before you start
1. Check the remaining time on the disc.
DVD-RAM/DVD±RW/+R discs should be formatted or initialized in
advance before beginning recording. (See page 52.)
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
You cannot record copy protected movie.
01287A(01)-VR357-XAA-ENG.indb 53 01287A(01)-VR357-XAA-ENG.indb 53 2007-01-22 오전 10:37:58 2007-01-22 오전 10:37:58