Samsung RS263TDPN-XAA - Manual (Page 14)

14_ setting up
setting up your side-by-side refrigerator
setting uP the refrigerator(Cont’D)
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
Tools you will need
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the
three screws counter-clockwise.
Separating the water supply line from the refrigerator
1. Remove the water tube by pressing the coupler 2 and pulling the water tube 1 away.
Reattaching the water supply line
1. While pressing the front face of coupler
2 , insert the water line 1 in the coupler.
Carefully place front cover and push to
snap it into position.
2. Insert 1 clip in plastic bac and check that it
holds the line firmly
The water line must be fully inserted to
the marked line to prevent water leakage from the dispenser.
Do not cut the water line. Gently separate it from the coupler.
1
2
front Leg CoVer
sCrew
Philips Screwdriver Flat-blade Screwdriver 10mm Socket Wrench
1 2
Line Line
Coupler Coupler
Coupler
Clip a (1/4”)