Samsung SGH-I777ZKAATT User Manual
Page 135
Connections 130
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to “Wi-Fi
Direct” on page 130.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set
up many of your device’s Wi-Fi service, including:
•
Setting your Wi-Fi sleep policy
•
Viewing your device’s MAC Address
•
Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings.
2.
Press
➔
Advanced.
For more information, refer to “Network Notification” on
page 95.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for Wi-Fi Direct.
1.
From the Home screen, tap
➔
Settings
➔
Wireless
and network
➔
Wi-Fi Direct settings.
2.
If you are currently connected to a Wi-Fi network, a prompt
will display Current network will be disconnected. Tap OK to
continue.
3.
Tap Wi-Fi Direct. A check mark is displayed indicating that
Wi-Fi Direct is active.
4.
Repeat steps 1 - 3 on the other device you want to connect
with.
5.
On your phone, at the Search for devices prompt, tap OK.
Tap the Do not show again checkbox if you want to skip this
step in the future.
The device scans for other Wi-Fi Direct devices.
6.
Once the device you want to connect to is displayed, tap
on it.
7.
Tap Connect.
8.
The other device has 2 minutes to tap OK for the
connection to be made.