Samsung RS265TDPN-XAA - Manual (Page 20)

20_ setting up
setting up your side-by-side refrigerator
INSTALLING THE WATER LINE
Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
Y rdware store.
• 1/4” compression nut • plastic tubing
• copper tubing • ferrule
1. Tighten the compression nut into the 1/4” compr
- If you are using copper tubing, slip the compr ession nut (not included) and ferrule (not included)
on copper tubing (not included) as shown.
- If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing .
2. Tighten the compression nut into the compression fitting. Do not over -tighten the compression nut .
3. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to r epair or disassemble the water line, cut off 1/4” of the plastic tubing to make sure
you get a snug, leak-free connection.
When using power cord
To prevent power cor d damage, after product installation, arrange
the remaining power cord
CAUTION
• ferrule
Assembled)
Assembled)