Operating your french door refrigerator – Samsung RFG293HABP-XAA User Manual
Page 23
02
o
PERA
tin
G
Fridge Button
Press the Fridge button (
4
) repeatedly until the desired temperature is shown in the display (
B
).
Whenever you press the button, the temperature will move 1°C degrees with each push. You can set the
temperature between 7°C and 1°C. Five seconds after the new temperature is set, the display will again
show the actual current refrigerator temperature until a new temperature is selected.
3°C is recommended.
The temperature of the freezer and fridge may rise if you open the doors too frequently or if you
place a large amount of warm or hot food inside. This may cause the digital display to blink. Once
the freezer and refrigerator temperature return to their normal set temperatures, the blinking stops.
If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the appliance,
waiting for around 10 minutes, and then plugging the power cord back in.
E.Saver Button
Press the E.Saver Button (
6
) for better energy efficiency. If E. Saver mode is ON, the button will light up
blue.
If condensation occurs on the doors, wipe up the water drops and
turn the E.Saving function off.
Operating your French Door Refrigerator
Operating
_23
DA68-01926B.indb 23
2010.5.11 11:33:38 AM