Getting started, Using the battery pack, Inserting the battery pack – Samsung HMX-M20BN-XAA User Manual
Page 28: Ejecting the battery pack
OPEN
❸
❷
❶
24
Inserting the battery pack
1.
Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards
①
.
2.
Insert the battery pack into the battery
pack slot until it softly clicks.
- Make sure that the SAMSUNG logo
is facing up when the camcorder is
placed as shown in the figure.
3.
Close the battery/memory card cover by
sliding the battery/memory card cover
switch towards
②
.
Ejecting the battery pack
1.
Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards
①
.
2.
Eject the battery pack by sliding the
battery release switch towards
③
.
3.
Close the battery/memory card cover by
sliding the battery/memory card cover
switch towards
②
.
USING THE BATTERY PACK
Purchase extra battery packs to allow continuous use of your camcorder.
• Use only Samsung-approved battery packs. Do not use batteries from other manufacturers. Other
manufacturer's batteries can cause overheating, fire or explosion.
• Samsung is not responsible for problems that occur you if you use unapproved batteries.
getting started