Samsung RFG293HAWP-XAA - Manual (Page 5)

Fridge Button
Press the Fridge button ( 4 ) repeatedly until the desired temperature is shown in the display ( B ).
Whenever you press the button, the temperature will move 2°F degrees each push and you can set the
temperature between 46°F and 34°F. Five seconds after the new temperature is set, the display will again
show the actual current freezer temperature until the new temperature is selected.
38°F is recommended.
The temperature of the freezer, fridge of pantry room may rise when you open the doors too
frequently, or if a large amount of warm or hot food is place inside.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to
their normal set temperatures, the blinking will stop.
If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance,
wait for around 10 minutes and then plug the power cord back in.
E.Saver Button
Press the E.Saver Button ( 6 ) for better energy efficiency. If E. Saver mode is ON, the button will light up
blue.
If condensation occurs on the doors, wipe the water drops and
turn E.Saving function.
Cooling Off Mode
This function is for store display refrigerators. It is not for customer use.
In Coolong Off Mode, the refrigerator works but doesn’t make cool air. To cancel this mode, press
the Power Freeze and Freezer buttons at the same time for 3 seconds until a “Ding-Dong” sound
is heard and the unit will now cool.
CAUTION
QS Guide (AW2-ND)-EN.indd 5 2010.3.23 8:24:4 PM