Samsung SGH-T229SRATMB - Manual (Page 76)

73
2. Press the key to place a check mark on the selected item and lock the contents.
• To lock all of the contents, select All application.
3. Press the key to remove the check mark.
Change password
The Change password feature allows you to change your current phone password to a new one. You must enter the
current password before you can specify a new one.
Note: The current password is the password you created on initial use of a password feature.
Once you enter a new password, you are asked to confirm it by entering it again.
Note: If you change your password, be sure to write it down and keep it in a safe place. If you forget your password, your phone will
require service to have it unlocked.
Check PIN code
When the Check PIN code feature is enabled, you must enter your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN cannot use your phone without your approval.
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
– Disable: the phone connects directly to the network when you switch it on.
– Enable: you must enter the PIN each time the phone is switched on.
Change PIN code
This feature allows you to change your current PIN, provided that the PIN check feature is enabled. You must enter
the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.