Samsung PL50A450P1XZP - Manual (Page 16)

English - 16
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while before you see a full picture.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
1 If the television is in standby mode, press the POWER button on the remote
control. The message Start Plug & Play. is displayed. Press the ENTER button.
Language menu is displayed.
2 Select the appropriate language by pressing the ▲ or ▼ button. Press the
ENTER button. The message Select 'Home Use' when installing this TV in
your home. is displayed.
 Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER button.
➢  The default selection is
Home Use.
 We recommend setting the TV to Home Use mode for the best picture in
your home environment.
 Store Demo mode is only intended for use in retail environments.
 If the unit is accidentally set to Store Demo mode and you want to return
to Home Use (Standard): Press the Volume button. When the volume
OSD is displayed, press and hold the MENU button for 5 seconds.
4 The message Check antenna input. is displayed with OK selected.
Press the ENTER button.
5 Press the ▲ or ▼ button to select Air, STD, HRC, or IRC, then press the
ENTER button.
Continued...
Plug & Play
Select 'Home Use'
when installing this TV in your home.
Move Enter
Store Demo Home Use
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
Language
Move Enter
English
Français
Español
Português
Plug & Play
Check antenna input.
Enter Skip
OK
Plug & Play
Air/Cable Air
STD
HRC
IRC
Move Enter Skip
BN68-01449A.indb 16 2008-04-07 오후 6:02:34