Samsung SPH-A523HBASKE - Manual (Page 28)

25
Making a Call — Speed Dialing
You can store phone numbers and contact names in your device’s Contacts list.
Speed Dialing lets you quickly and easily dial any contact in your Contacts list by
using that contact’s location number in the list. You can assign and change location
(speed dial) numbers for your contacts. (See “Speed Dial Numbers” on page 58 for
more information.)
One-Touch Dialing
Memory locations 002 through 009 are special One-Touch dialing locations. You can
call the phone numbers stored in your device’s Contacts list from 002 through 009
by pressing and holding a single key.
Example: For location number 003, press and hold the key until the name and number appear in the
display and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 099 are special Two-Touch dialing locations.
Example: For location number 013, briefly press the key, then press and hold the key until the
name and number appear in the display and the number is dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch dialing locations.
Example: For location number 113, briefly press the key, briefly press the key again, then
press and hold the key until the name and number appear in the display and the number is
dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) T pause(s) simply wait for
the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) P pause(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Answering a Call
Your device notifies you of a call in the following ways:
• A ring tone sounds and/or your device vibrates. [Your device provides five ring
volume settings — 1 – 5 — and five Ring Vibration settings — Ring Only, Vibrate,
Mute, Ring then Vibrate, Ring and Vibrate.]