Samsung SC-DX205-XAA - Manual (Page 70)

56_ English
PLAYING BACK A FINALIZED DISC
Once finished recording, you must finalize the disc for a playback on a computer or DVD
player/recorder. page 55
Playing back a finalized disc on a computer with a DVD drive
The DVD disc can be played on a computer with a DVD-running media (DVD drive).
1. Turn on your computer.
2. Insert a finalized disc into the DVD drive of the computer.
• DVD playback application software starts and the disc will play.
• If DVD playback application does not start automatically, run the application by navigating
through the start menu.
• Use a DVD drive compatible with 3 1/2 inch (8cm) discs.
• Videos on a DVD disc may not be playable using ‘Windows Media Player’
application.
• Video and audio may pause or skip when you play back a DVD disc on your
computer. If this occurs, copy the data into your hard disk drive.
• Videos on a DVD disc cannot playback or edit using the provided software,’
CyberLink MediaShow4.’ This provided software supports recordings on a memory
card only.(SC-DX205 only)
• In order to play the disc on a computer you need to have DVD playback software
installed and running. Also, in order to play back a DVD-R DL you must have a DVD
drive capable of reading dual-layered DVD discs.
• In order to playback videos on the finalized disc on a computer, you need to have
supportive video codec for MPEG2 and AC3 installed.
Playing back a finalized disc on a DVD player / recorder
To playback a disc
You can playback finalized DVD-R/-RW (Video mode)/-R DL discs on DVD players/recorders.
Playback is not guaranteed in all DVD players/recorders. For compatibility details, refer to
your DVD player/recorder owner’s manual.
disc mode: disc management
➟
➟
Computer with a
DVD drive
Finalize
DVD
-RW
DVD
-R DL
DVD
-R
➟
➟
DVD player/recorder
Finalize
DVD
-RW
DVD
-R DL
DVD
-R