Samsung LS20HABKBQ-XAA - Manual (Page 16)

If you rotate the screen without lifting it to its maximum height, the screen may be damaged
because the edge of the screen would hit the floor.
Attaching a Base
This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
A. Monitor
B. Mounting interface pad ( Sold separately )
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove two screws and then remove the Stand from the LCD monitor.
4. Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it
with four screws that came with the arm-type base, wall mount hanger or other base.
Installing the Monitor Driver (Automatic)
A.Stand Stopper
The Auto Rotation may not be supported depend on the monitor model.