Samsung LS23CFUKFV-ZA - Manual (Page 13)

1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor.
Make sure to use a TV antenna cable (sold separately) as the antenna cable.
• When using an interior antenna terminal:
Check the antenna terminal on the wall first and connect the antenna cable.
• When using an outdoor antenna:
If you are using an outdoor antenna, use a professional for installation if possible.
• To connect the RF cable to the antenna input terminal:
Keep the copper wire portion of the RF cable straight.
2. Turn on the monitor.
3. Select TV using the TV button on the remote control.
4. Select a desired TV channel.
Note
Is weak signal causing poor reception?
Purchase and install a signal amplifier for better reception.
Connecting DVD / Set Top Box
Note
Connect to the DVD / Set Top Box input if the device has a [COMPONENT IN] connector. You can
watch Component simply by hooking up the Component with the monitor as long as the power is on.
Connect the port of the DVD, VCR (DVD / Set-Top Box) to the [R-AUDIO-L] port of the monitor.
Connect the VIDEO OUT port of the DVD / Set-Top Box to the [P
R
, P
B
,Y] input ports using a
component video cable (P
R
, P
B
,Y).
Note
Select "Component" using the 'SOURCE [ ]'
If you connect the P
R
, P
B
, and Y component cables to the incorrect terminals, the screen will be
displayed in red or blue.
Connections