Getting to know your camera, Instructions – Samsung EC-AQ100ZBPBUS User Manual

Page 2

Advertising
background image

1

Thank you for buying a Samsung Digital Camera.
å Prior to using this camera, please read the user manual thoroughly.

å If you require After Sales service, please bring the camera and

the cause of the camera malfunction (such as battery, Memory
card etc.) to a Samsung Authorized Service Center.

å Please check that the camera is operating properly before you

intend to use it (e.g. for a trip or an important event) to avoid
disappointment. Samsung takes no responsibility for any loss or
damage that may result from camera malfunction.

å Keep this manual in a safe place.

å If you use a card reader to copy the images on the memory card to

your PC, the images could be damaged. When transferring the
images taken with the camera to your PC, be sure to use the
supplied USB cable to connect the camera to your PC. Please note
that the manufacturer holds no responsibility for loss or damage of
images on the memory card due to the use of a card reader.

å The contents and illustrations of this manual are subject to

change without prior notice for upgrading the camera functions.

å It is advisable to replace waterproof components once a year to

maintain the waterproof performance. Contact your nearest Samsung
service center for the replacement of waterproof components.

Ä Microsoft, Windows and Windows logo are registered trademarks

of Microsoft Corporation incorporated in the United States and/or
other countries.

Ä Adobe and Reader are either trademarks or registered trademarks

in the United States and/or other countries.

Ä All brand and product names appearing in this manual are

registered trademarks of their respective companies.

Ä For Open Source License information, refer to the “OpenSourceInfo.pdf”

in the provided CD-ROM.

Getting to Know your camera

Setting up the application
software

Instructions

Use this camera in the following order.

Take a picture. (p.23)

Insert the supplied USB cable
into the PC’s USB port and the
camera’s USB connection
terminal. (p.96)

Check the camera’s power. If the
power is turned off, press the
power button to turn it on.

Open Windows’s EXPLORER
and search for [Removable Disk].
(p.97)

Take a picture

Insert the USB cable

Check the camera's power

Check [Removable Disk]

To use this camera with a PC, install
the application software fi rst. After
you have done this, you can move
the stored images in the camera to
you PC and can edit them using an
image editing program.

Advertising
This manual is related to the following products: