Tools you will need, Mounting space, General information – Samsung SMH1926W-XAA User Manual

Page 7: Damage - shipment/installation, Parts included, Additional parts

Advertising
background image

6

General information

7

General information

# 1 and #2 Phillips

screwdriver

Pencil

Ruler or tape measure and

straight edge

Carpenter square (optional)

Tin snips (for cutting

damper, if required)

Scissors (to cut

template, if necessary)

Electric drill with

3

/

16

˝, ½˝ and

⅝˝ drill bits

Filler blocks or scrap wood

pieces, if needed for top

cabinet spacing (used on

recessed bottom cabinet

installations only)

Gloves

Saw (saber, hole or

keyhole)

Stud finder or Hammer

(optional)

Safety goggles

Level

Duct and masking tape

TOOLS YOU WILL NEED

12˝ max.

16 ½˝

30˝

Bottom edge of the

cabinet needs to be 30˝

or more from the cooking

surface.

Backsplash

30˝ min.

NOTES:
• The space between the cabinets must be 30˝ wide and

free of obstructions.

• This microwave oven is for installation over ranges up

to 36˝ wide.

• If you are going to vent your microwave oven to the

outside, see the Hood Exhaust Section for exhaust

duct preparation.

If installing the microwave oven beneath smooth

flat cabinets, be careful to follow the instructions

on the top cabinet template for power cord

clearance.

maximum cabinet depth above and beside the

unit is 12˝.

The dimensions provided are the minimum

required for mounting the microwave oven. Local

codes and the practical use of the range will

likely require you to provide more than the 13.5˝

shown between the range and the bottom of the

microwave.

mOUNTING SPACE

If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or

replacement.

If the unit is damaged by the customer, repair or replacement is the responsibility of the customer.
If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by

arrangement between the customer and installer.

DAmAGE - SHIPmENT/INSTALLATION

ADDITIONAL PARTS

PART

qUANTITY

Top Cabinet

Template

1

Rear Wall Template

1

Installation

Instructions

1

Separately Packed

Grease Filter

2

Exhaust adaptor

1

PARTS INCLUDED

SMH1816_XAA-DE68-03943A-02-EN_120725.indd 7

2012-07-25 �� 7:49:13

Advertising
This manual is related to the following products: