Samsung RFG293HAWP-XAA - Manual (Page 20)

COMPLETING THE SET UP
Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features
and functions of the appliance. By completing the following steps, your refrigerator should be fully
operational.
1. Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the
wall. Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly
chilled and the motor will run smoothly.
Reset the refrigerator and freezer to the temperatures you want.
4. After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can
store food and drinks in the refrigerator after the temperature is sufficiently cool.
If condensation or water drops appears on both sides of fridge door’s central part, turn the Energy
Saver mode off after removing the condensation.
(See the explanation on Energy Saver button in the USING THE CONTROL PANEL.)
20_ Setting Up
Setting up your French Door Refrigerator
DA68-01926A-11.indb 20 13. 12. 2. �� 5:25