Samsung DVDV3800V-XAA - Manual (Page 26)

JPEG Playback
49
Program Play & Random Play
• The memory card is played in the same way with the CD-R and Photo CD.
1. Insert a CD-R or Photo CD written JPEG file into the tray and close
it. In case of a Memory Card, insert it follow to the right figure.
➢
• In case of the Memory Card, it is very important to insert it in
which directions.(Refer to 45 page.)
2. Press the M.CARD button.
- Every time you push the M.CARD button, the system enters the
Memory Card mode and the DVD/CD mode in turn.
- Memory Card mode : Plays the Memory Card
DVD/CD mode : Plays the CD-R & Photo CD
3. If there are above two kinds of playable files in the memory card or
CD-R, the right screen is displayed. Press the UP/DOWN button to
select JPEG in media types and press the ENTER button.
- If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
- To change the currently playing media, press the STOP ( ■ )
button twice and then press the DISC MENU button.
4. The Album screen will be appeared.
- To see the next 6 images, press the and to see the previous
6 images, press the button.
5. Select an image and press the ENTER button.
- Use the UP/DOWN or LEFT/RIGHT buttons on the remote
controller to select the pciture you want to view and then press
the ENTER button.
- After selection of the picture, the following Menu Bar is appeared
and it is disappeared after 10 seconds.
Press the DISC MENU button to pop up again the Menu Bar.
• : Return to the Album Screen.
• : Each time the ENTER button is pressed, the picture
rotates 90 degrees clockwise.
• : Each time the ENTER button is pressed, the picture is enlarged
up to 4X. (Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)
• : The unit enters slide show mode.
* Press the DISC MENU button in Normal mode to see the Menu screen.
ALBUM PHOTO: 1 /215
PHOTO: 1 /215
PHOT PHOTO: 1 /215 O: 1 /215
RETURN
48
Program Play (CD/MP3/WMA)
1. With the MP3 in Stop mode, press the MODE button.
2. Use the LEFT/RIGHT buttons to select PROGRAM.
Press the ENTER button.
3. Use the LEFT/ RIGHT/ UP/ DOWN buttons to select the first track
to add to the program.
Press the ENTER button. The selection numbers appear in the
Program Order box.
4. Press the PLAY/PAUSE ( ❿ ll) button.
The disc will be played in programmed order .
Random Play (CD/MP3/WMA)
1. With the MP3 in Stop mode, press the MODE button.
2. Use the LEFT/ RIGHT buttons to select RANDOM.
Press the ENTER button.
The disc will be played in random order.
➢
• Depending on the disc, the Program and Random Play
functions may not work.
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
PROGRAM RANDOM
RETURN
PROGRAM 01 PROGRAM 01
Track
05 06 07 08
09 10 11 12
13 14 15 16
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
Program order
01 02 03 04
CLEAR RETURN
PROGRAM RANDOM
RETURN
2
00222A DVD-V3800/XAA-Eng3 7/28/03 3:40 PM Page 48