Starting the multi slide show ( ), Start the multi slide show, Selecting images – Samsung EC-TL105ZBPBUS User Manual

Page 80

Advertising
background image

79

Images can be displayed continuously at pre-set intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
1. Press the play mode button and press the MENU button.
2. Press the Up / Down button and select the [Multi Slide Show]

menu tab and press the OK button.

Start the Multi Slide Show

The Multi Slide Show can start only in the [Start] menu.
1. Use the Up / Down button to select the [Start] menu and press

the Right button.

2. Select a desired sub menu by pressing

the Up / Down button.

[Play] : The Multi Slide Show is

closed after one cycle.

[Repeat] : The Slide show is repeated

until cancelled.

3. Press the OK button and the slide show will be started.

- To pause the slide show while playing it back, press the OK

button again.

- Pressing the OK button again will cause the Multi Slide Show

restart.

- To stop playback of the Multi Slide Show, press the OK button,

and then press the Left or Right button.

Back Set

Images :All

Interval :1

sec

Music :Off

Effect :Off

Start

Play
Repeat

You can select image to view
1. Use the Up / Down button to select the

[Images] menu and press the Right
button.

2. Select a desired sub menu by pressing

the Up / Down button.

[All]

: All images saved on the

Memory are played back. Press the OK button to
save the configuration.

[Date] : Images taken in a specified date are played back.

Press the OK button to save the configuration.

[Select] : Play only the selected images. The selected image

can be saved as [Select1], [Select2] and [Select3].
If you save the selected image with the [New Select]
command, it will be saved as [Select1]. But when a
new image is saved again using [New Select], the
former image which had been saved as [Select1] will
be saved as [Select2] automatically.You can change
and cancel the images which were saved as [Select1],
[Select2] and [Select3]. Press the Fn button to save
the configuration.

3. Select [Play] or [Repeat] in the [Start] menu to start the multi

slide show.

Selecting Images

Back Set

Images :All

Interval :1

sec

Music :Off

Effect :Off

Start

All
Date

Select

Starting the Multi Slide Show (

)

Advertising
This manual is related to the following products: