Samsung HLS4676SX-XAA - Manual (Page 20)

Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
1 Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
2 Connect a set of audio
cables between the AUDIO
IN (1 or 2) jacks on the TV
and the AUDIO output jacks
on the camcorder. If you
have a mono Camcorder,
connect L(mono) to the
Camcorder audio out using
only one audio cable.
3 Connect a video or S-video
cable between the VIDEO IN
(1 or 2) (or S-VIDEO IN) jack
on the TV and the VIDEO (or
S-VIDEO) output jack on the
Camcorder. The audio-video
cables shown here are usually
included with a Camcorder.
(If not, check your local
electronics store.)
If your Camcorder is stereo,
you need to connect a set of
two cables.
NOTE
• Please be sure to match the
color coded input terminals
and cable jacks.
Connections
English - 20
Camcorder
Output Jacks
1
TV Side Panel
or Camcorder
2
3
BP68-00617A-00Eng(016~027) 8/29/06 2:23 PM Page 20