Samsung SCH-U490NKAVZW - Manual (Page 50)

46
Note: You can assign a speed dial location to each number associated with
the contact (Home, Work, Mobile 1, Mobile 2, and Fax.).
8. When you’re finished entering information for the entry,
touch SAVE. The entry is saved to your Contacts.
9. If you selected Update Existing, the Contact List opens in
Search mode. Touch the Directional key up or down
to browse through entries, or enter the name of the entry
using the keypad. Once you’ve highlighted the entry you
wish to update, touch .
10. An UPDATE EXISTING pop-up screen with a selection list
of entry types displays. Touch the Directional key up
or down to highlight the desired type then touch .
The number is added to the selected entry and saved to
your Contacts.
Method 3
Storing Numbers After a Call
Once you’ve finished a call, you can store the number of the
caller to your Contact List.
Note: If the call was incoming and Caller ID information was unavailable,
then the store option is also unavailable.
1. After you press the End/Power key to end your call,
the call time, length of call and phone number appears in
the display.
2. Touch the right soft key Save. You’re prompted to
select Add New Contact, or Update Existing. Follow the
on-screen prompts to designate other information.
Adding Pauses
Calls to automated systems often require a password or account
number. Instead of manually entering numbers each time, store
the numbers to your Contacts along with special characters
called pauses.
1. Slide the phone up and enter the number.
2. Touch the right soft key Options to highlight Add 2-
Sec Pause (A “P” appears in the display) or Add Wait (A
“W” appears in the display) and touch .
• Add 2-Sec Pause: A two-second pause stops the calling
sequence for two seconds and then automatically sends the
remaining digits.
Violin.book Page 46 Tuesday, March 3, 2009 2:12 PM