Samsung SCH-M828CAATFN - Manual (Page 102)

98
Important!: DO NOT remove a microSD card while the device is accessing or
transferring files. Doing so will result in loss or damage of data.
Make sure your battery is fully charged before using the microSD
card. Your data may become damaged or lost if the battery runs
out while you are using the microSD card.
microSD Adapter
The supplied microSD adapter allows you to use microSD cards
in other SD-compatible devices, like computers, cameras, and
printers. Before using the microSD card with an SD-compatible
device, you will need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
ᮣ With the label side of the microSD card facing up, insert
the card into the supplied microSD adapter, and gently
slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
ᮣ Hold the front edge of the microSD card, and gently pull it
out to remove it from the adapter.
Write Protection
The microSD adapter has a built-in Write Protection lock to
prevent accidental overwriting or removal of your data when the
microSD card and adapter are inserted in another device.
ᮣ Slide the Write Protection lock tab down into the “Lock”
position to prevent overwriting of data. To allow data to be
added or removed from the microSD card, slide the Write
Protection lock tab up into the normal position.
Connecting Your Device to Your Computer
Before using your phone’s mass storage capabilities, you need to
prepare your device’s data services to synchronize with your
desktop or laptop computer. Once you have connected the phone
to the computer, you can transfer your data to or from the
microSD card.
Note: If you experience a setup issue, refer to the “Troubleshooting USB
Connection” on page 99.
Before You Begin
Here is what you will need to have before you can successfully
establish a connection between your phone and a PC.
• microSD card (internally installed prior to start)
• compatible USB cable (included)
1. With the microSD card installed, connect your phone to
your computer using a compatible USB cable. (Wait for the
connection to establish. When connected, the host
computer automatically detects your phone.)
SCH-M828UM.book Page 98 Thursday, September 1, 2011 3:43 PM