Samsung DMR77LHW-XAC - Manual (Page 6)

_ installing the dishwasher
installing the dishwasher
Be sure that you or your installer follow these instructions closely so that the new
dishwasher works properly and that you’re not at risk of injury when washing
dishes.
STep 1 checkING The PArTS ANd TOOlS
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts required
Provided
Brackets
2 Screws
(for the Brackets)
2 Screws
(for the side walls)
2 Screws
(for the kick plate)
Not provided
Power cable
Twist on wire
connector
Strain relief
Electrical tape &
Standard duct tape
Water supply line 90° Elbow(3/8”) Tube fittings
Teflon ® tape or sealing
compound
Hose clamp Air gap Rubber connector
For the water supply line - Flexible stainless steel braided supply line or Minimum 3/8” O.D.
copper tubing with compression fitting. (Plastic tubing is not recommended)
A 90° elbow with 3/8” N.P.T. external pipe threads on one end, and sized to fit your water
supply line (copper tubing/compression fitting, or braided hose) on the other