Samsung EC-TL110ZBPBUS - Manual (Page 30)

29
Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons.
Used for turning the camera’s power
on / off. If there is no operation during
the specifi ed time, the camera's power
will be turned off automatically to save
battery life. Refer to page 63 for more
information about the auto power off
function.
POWER button
Used for taking an image or recording voice in the Recording mode.
å In MOVIE CLIP mode
Pressing the shutter button down
fully starts the process for recording
a movie clip. Press the shutter button
once and the movie clip is recorded
for as long as the available recording
time in the memory allows. If you wish
to stop recording, press the shutter
button again.
å In Still image mode
Pressing the shutter button down halfway activates the autofo-
cus and checks the condition of the fl ash. Pressing the shutter
button down fully takes and stores the image. If you select voice
memo recording, the recording will start after the camera has
fi nished storing the image data.
SHUTTER button
You can use the Smart button at the top
of your camera to select the correct smart
mode.
Ä See p.55 for further details.
Smart button