Connecting to a power source – Samsung EC-SL310BBA-US User Manual

Page 15

Advertising
background image

014

Connecting to a power source

How to charge the rechargeable battery (SLB-10A)

Before inserting any cables or AC adapter, check the directions

and do not insert using force. It may cause breakage of cable

or camera.

If the charging LED of the AC Charger does not turn on or blink

after inserting the rechargeable battery, please check whether

the battery is inserted correctly.

If you charge the battery with the camera power on, the battery

can’t charge fully. Turn the camera off while charging the

battery.

Charging LED of the AC Adapter

Charging LED

Being Charged

Red LED is on

Charging is complete

Green LED is on

Charging error

Red LED is off or blinking

Being discharged

(Using the AC adapter)

Orange coloured LED is on

– If you insert the fully discharged battery to charge it, do not turn on the

camera at the same time. This is because of the low battery capacity.

Charge the battery for more than 10 minutes before using the camera.

– Do not use the flash frequently or take a movie clip with the fully

discharged battery charged for a short time. Even if the charger is inserted,
the camera power may be turned off because the rechargeable battery is

discharged again.

Advertising
This manual is related to the following products: